SCADA Systems Explained | Onupkeep.com
Answered August 13 2020
SCADA stands for Supervisory Control and Data Acquisition. It is a computer control system that is used to monitor and control plant processes. SCADA uses data communications, graphical user interface, and extended management to monitor systems.
Origins of SCADA
Before the technological age dawned, industrial organizations and manufacturing facilities employed teams of technicians to manually control and check on all their equipment to keep them operating. This highly resourceful and labor-intensive system used paper-based records, pushbuttons, and analog dials to perform monitoring and controls.
For smaller facilities, this manual system was workable for a time. However, as companies grew in size and reach, it became more difficult for them to rely on nonautomatic processes, especially over longer distances. Original automation tools began with timers and relays, which reduced the number of trips technicians needed to make to remote locations.
As growth continued, though, organizations found that timers and relays had their limitations. They were not flexible enough and took up a great deal of physical space. Around 1950, computers were entering the picture and brought a new level of hope for industrial controls. One of the most useful initial developments was telemetry, which allowed off-site monitoring and data transmission. SCADA originated in the 1970s with the advent of microprocessors and programmable logic controllers (PLC).
Today, the biggest manufacturing companies in the world are also known to be the most data-driven. In an age of growing technological capabilities, the importance of collecting data is pushed to the limit with the use of systems such as SCADA.
By collecting and monitoring real-time data, SCADA shows an overview of how each key piece of equipment in the plant is performing. Sensors on the equipment send signals through remote terminal units (RTU) and PLCs. This gives the SCADA system the ability to pinpoint anomalies in system functions based on the collected data, thereby allowing the company to promptly take action on the issue.
SCADA allows maintenance personnel to make more informed decisions. The system is applicable to a wide variety of industries, including oil and gas, energy, and manufacturing. Virtually any corporation that benefits from accurate and timely data monitoring will benefit from SCADA.
The Evolution of SCADA
Like just about all industrial computer systems, SCADA was first implemented on huge, mainframe computers. This dictated the fact that they were standalone systems, functioning and housed in a single location. These were known as monolithic systems.
A couple of decades later, SCADA adapted to the shrinking computer hardware, PC-based software, and local area networks. This allowed the systems to break free of initial walls and join similar systems to share information and data more efficiently. However, many of these systems were still proprietary and closed. These were known as distributed systems.
By the turn of the millennium, SCADA joined the ranks of other computer systems in a more open environment. This now networked SCADA system ran on ethernet, which allowed multiple systems, vendors, and partners to join in the network and connect to the SCADA system.
Although technology has continued to advance, many industrial companies still use proprietary technology, making data transfer cumbersome. Some companies, however, have evolved to offer a SCADA system of linked and connected devices.
Historically, the challenge with SCADA systems was finding an efficient communication network to connect the devices. Early technologies relied on proprietary systems to link the components. Though effective to some extent, those systems had limitations in keeping up with the times.
Meanwhile, information technologies have been emerging over the last few decades. The development of structured query language (SQL) databases was significant in advancing data management. Modern SCADA systems incorporate SQL capabilities, further linking to enterprise resource planning systems for a smoother and more holistic operation.
Market research analysts also state that the industrial control systems market, which includes SCADA systems, is projected to reach $181.6 billion by 2024. The Industrial Internet of Things, cloud technology, and evolving web technology will no doubt have an impact on future SCADA systems.
How SCADA Works
Think of SCADA as a bridge that links equipment with operators and maintenance personnel. The SCADA system requires some key components to facilitate this transmission of data from the physical equipment to the operator’s display screen. This, in turn, allows maintenance technicians to perform certain tasks or monitor asset behavior along the way.
Some typical tasks include checking sensors and other devices that may be installed at remote substations or control stations, tracking machine system events for future reference, and changing the level or speed of production processes from a central spot.
In essence, SCADA systems allow technicians to stay in one spot, yet extend their virtual reach to many different assets, locations, and systems. The automation presented by SCADA systems allows greater efficiency and better decision making for the management team, leading to greater productivity, increased safety, and revenue generation.
Key Components of a SCADA System
Sensors and Manual Input
Digital or analog sensors serve as measuring tools that collect data from various parts of the plant. Sensors may range from simple binary options, such as an on or off signal, to more complex tools that measure flow rate, temperature, and pressure. In addition, technicians or operators at the remote or central location can manually input data into the system.
Data collected by sensors is only useful if it can be converted into a form that is easily comprehensible. Remote terminal units (RTU) and programmable logic controllers (PLC) are the devices that can translate the collected data into usable information. Since information is collected throughout an entire system, the sheer amount of data can be great.
Data feeds that are converted by the RTUs and PLCs meet at a master unit known as the supervisory system or the human-machine interface (HMI). This interface brings useful information to the maintenance team. At this point, one operator can have a complete picture of an entire process or system. The data is presented in an easily digestible format, and the employee can take control of certain pieces of equipment to make repairs or isolate failures.
All the SCADA components are located throughout the plant and must be linked together by a communication network. Conventionally, telephone lines and circuits have served as this network with newer wireless options now available that use radio waves or cellular satellites.
Who Uses SCADA?
A wide variety of companies, organizations, and businesses can use SCADA systems in order to improve efficiency, share quality data across departments, and better identify and address systems issues. Both private and public sector organizations can benefit from SCADA systems including small, basic manufacturing plants to large, multi-million dollar corporations.
Companies within the oil and gas, power, water, and transportation industries often employ SCADA systems, as well as businesses in energy, food, healthcare, and recycling. SCADA systems can be configured to do everything—from managing the operations of freezer and refrigeration systems at a food distribution company to reducing downtime on a production line at a manufacturing plant.
SCADA systems help businesses comply with health and safety regulations, meet government compliance requirements, boost efficiency, and save money.
How SCADA Benefits Maintenance and Reliability Efforts
Since SCADA systems provide flexible, scalable means to monitor what’s happening throughout a complex production process, on a shop floor, or within remote substations, they can make a significant contribution to maintenance and reliability efforts.
Reliability-centered maintenance (RCM) is a maintenance strategy that boosts equipment and asset reliability to a top priority. The strategy is designed to optimize the maintenance system of an entire organization with the intent to improve efficiency and timely production. RCM typically focuses on identifying and prioritizing different failure modes. This focus helps in scheduling activities that will prevent major system failure.
It’s easy to see how SCADA can go hand in hand with an RCM system, as it provides a great deal of automated information and data on the performances of various assets and machinery in a plant. SCADA also allows human intervention early in the process, preventing the failures that an RCM strategy is designed to seek and identify. Here are some real-life applications.
Automating Electric Distribution
Electrical utilities around the world are facing an increase in the demand for power, as well as a lower-than-ever tolerance for outages. Maintaining these complex electrical grids and equipment to be as perfectly reliable as possible is a significant challenge. SCADA systems play an important role in helping utilities achieve that goal.
In this industry, sensors can collect information from various points at each substation. Additional manual data can be added by either the central or substation staff. Besides collecting data and sending alerts when certain conditions signal an outage or potential for an outage, a well-programmed SCADA system can automate certain repairs. In addition, it can pinpoint the location of other problems, minimizing the time it takes for a technician to locate and diagnose the problem. Finally, various backup and redundant checks and processes can increase reliability throughout the power grid.
Identifying Failures on a Production Floor
Being able to identify potential failures before they occur is critical to maintaining a world-class level of uptime on any shop floor. For example, let’s look at the failure of a steam turbine component. If the overspeed trip device is not working properly, it may have no immediate effect on your overall system.
However, a SCADA sensor that recognizes this failure is not designed to only repair that component. Instead, the sensor alerts the maintenance department of the issue, so it can be repaired before its load drops suddenly and acceleration ensues. If the turbine is allowed to deteriorate to this level of failure, a company may incur damage from flying blades or even employee injury from the malfunction.
Manage Sensitivity and Security in IT
SCADA systems help IT and telecom organizations better control sensitive systems and monitor remote environments. Sensors can provide around-the-clock “eyes” on things like the temperature of servers or the humidity in rooms with sensitive IT equipment to avoid or minimize damage caused by environmental factors.
In addition, SCADA systems work well within security applications such as alarm contact closures, magnetic door sensors, and motion detectors.
Nerve Center of Alternative Energy
Wind-powered energy is rising in popularity as the world demands more renewable energy options. SCADA systems play a critical role in modern wind farms. The SCADA system brings each piece of turbine equipment together with substations and weather monitoring equipment.
SCADA systems can even track all activity on a wind farm within a 10-minute window, which gives the human operator near real-time activity tracking. If anything looks amiss in the system, action can be taken almost immediately to protect the equipment and safety of the surrounding community. In addition, the SCADA system can track energy output and any functionality errors that can be used as evidence for warranty claims on equipment.
Data is sent through a fiber-optic network that summarizes not only the performance of the turbines and other equipment but also the performance of the wind itself. Meteorological equipment must be incorporated into the system in order to determine if lower power production is due to equipment issues or low winds.
SCADA systems, together with developments in IT technologies, are becoming an integral part of plant systems. They use Industrial Internet of Things technology such as sophisticated and simple sensors to collect a wealth of data from key components and processes throughout an organization, regardless of geographical location. Technology then allows the transfer and conversion of that data into usable information. Human-machine interface systems display and deliver the data to skilled technicians who can make data-driven decisions quickly and efficiently.
SCADA systems can work together with RCM and maintenance strategies that focus on predictive maintenance. They provide the data and technology to allow a great deal of automation and data collection, which means that problems and failures can be spotted at a point before they cause major equipment damage, shut down an entire production line, cause a serious accident, or result in an environmental catastrophe.
As technology continues to develop into the future, the potential for SCADA systems and related processes is great in helping companies increase revenue and safety.
Latest Maintenance Articles
- What Are Ideal Preventive Maintenance Schedules for Manufacturing Equipment?Root Cause Analysis Techniques and FundamentalsHow to Use eBay to Save Money and Time on ProcurementThe Ultimate Guide to Programmable Logic Controllers (PLCs)How to Respond to an FDA Warning LetterWhat Is Maintenance Process Mapping?
Fleet Management and GPS
Oil & Gas
Asset Management Questions & Answers
Root Cause Analysis Techniques and Fundamentals
Root cause analysis (RCA) is key to a successful maintenance program. But to conduct one effectively, it’s critical to understand the components required.
What Is Maintenance Process Mapping?
Without effective maintenance process mapping, an organization will never achieve stable maintenance processes. Learn what you need to know here.
CMMS vs. Asset Management: A Guide to Bridging the Gap
Without a strong background in CMMS and asset management, there is a good chance that you'll only end up with an expensive work order ticket system.
8 Steps to Implementing SOPs in Your Maintenance Team
Implementing standard operating procedures (SOPs) may be a challenge. In this article, we’ll discuss various aspects of how to tackle this challenge.
What Is a Standard Operating Procedure (SOP)?
A standard operating procedure, or SOP, is a document that lays out the steps to do something in a clear and concise way.
What are different types of food and beverage processing equipment?
We've compiled every type of food and beverage processing equipment out there in a list with everything you need to know.
What Is Straight Line Depreciation, and Why Does It Matter?
Straight Line Depreciation is an accounting method, and accounting is not the first thing you might associate with maintenance.
7 Metrics You Should Be Tracking for Maintenance Inventory
To get the very most out of your MRO (maintenance, reliability, and operations) inventory, you need to track data that reflects costs, turnover, etc.
What is Asset Management & ISO 55000?
An asset is any item that has potential or actual value to the company. Asset management is an approach to achieve the most asset value.
What’s a function and what’s functional failure?
A function describes the intention of a piece of equipment, while functional failures detail conditions that would prevent equipment from peak operation.
What is asset management? What are the top asset management certifications?
Asset management is generally defined as a system of activities that an organization performs to gain value from assets, including design and maintenance.
What are maintenance tasks to perform on indoor cycling bikes?
Maintenance tasks for indoor cycling bikes include daily, weekly and monthly cleaning, inspection, and adjustments to ensure strong durability.
What are some types of assistive devices and how are they used?
Assistive devices help individuals with disabilities live a more independent life by using technology and increasing everyday accessibility.
What is a Purchase Order and What to Include?
Purchase orders (POs) are created to start a purchasing relationship with an outside vendor. POs include quantity, delivery schedule, and payment terms.
What is maintenance management?
Maintenance management is the process of maintaining a company’s resources. It ensures efficient production and effective use of resources.
What are the most common ISO standards for manufacturing facilities to follow?
The most common ISO standards to follow for manufacturing facilities are ISO 55000, 55001, and 55002. All require an asset management system.
What is a bathtub curve?
A bathtub curve is a visual of a product's failure rate over time that maps out three periods that an asset experiences within its lifetime.
6 Interesting Facts About Equipment Failure
When it comes to equipment failure, there are a few interesting trends that we see. We can see some of the challenges effective reliability planning.
What are the phases of a turnaround maintenance procedure?
In maintenance, a turnaround is an event where one or more assets are temporarily removed from service so that maintenance tasks can be performed.
How much should I budget for maintenance for my equipment?
You should budget approximately 2% to 5% of your total RAV. This metric, known as %RAV, is calculated as a proportion of your facility's value and spending.
What is a fixed asset?
A fixed asset is one of two major categories of physical property for a company and includes those items that remain in one location during business operation.
What are the most common root cause analysis (RCA) mistakes and how do I avoid them?
Some of the most common root cause analysis mistakes involve poor definitions, focusing on the wrong thing, or ignoring root causes entirely.
How do I conduct a thorough root cause analysis?
For root cause analysis to be effective, you need to dig deep, have the right resources, and ask “Why?” until you get to a root cause.
How to Measure Inventory Performance with Inventory Management Metrics
To measure performance in inventory management, one of the most common metrics to use is “number of inventory turns" and target a value greater than 1.0.
What is the importance of collecting equipment failure data?
The collection of equipment failure data over time determines the reliability of your facility and enables proper asset management and life-cycle analysis.
Which root cause analysis (RCA) method should I use?
Of the numerous RCA methods used, the one you choose depends on the depth and nature of the problem, as well as the number of contributing causes.
When should I repair or replace an asset?
In order to decide if it is time to repair or replace an asset, you must compare the current value of the asset with the cost of repair.
What is Equipment Depreciation? Why it Matters + How to Calculate
Equipment depreciation is a measure of how much a piece of equipment drops in value each year. Using depreciation, you can make wiser maintenance decisions.
What is an asset life cycle?
An asset life cycle refers to the stages involved in the management of an asset. The life cycle of an asset starts with the planning stages.
What is the difference between availability and reliability?
Availability measures equipment's ability to operate, while reliability measures the ability of equipment to perform without failure.
What’s idle time and how does it differ from downtime?
Idle time is the time in which an asset is either waiting to run or isn’t scheduled to run and downtime is when the asset is incapable of running.
What is the difference between criticality and risk analysis with regards to maintenance and reliability?
Criticality is a measure of how important an asset is to your process. The more critical the asset, the more of an impact it will have if fails.
What is the difference between total effective equipment performance (TEEP) and overall equipment effectiveness (OEE)?
Overall equipment effectiveness (OEE), the most common metricperformance of a plant, is expressed as a percentage of the total production time.
What are leading and lagging metrics in maintenance?
Indicators are classified according to whether they predict future performance or describe past performance –- referred to as leading or lagging indicators.
What are ways to improve my equipment uptime?
There are numerous ways to improve your equipment uptime, each of which has to do with streamlining your maintenance processes.
What are the best metrics and KPIs for manufacturing companies?
Downtime and uptime are the heartbeats of a manufacturer - when the facility has too much downtime, the health of the organization suffers.
What’s the difference between downtime and breakdown time?
Breakdown time is downtime that results from the equipment breaking down. Equipment downtime is any time a piece of equipment is offline.
What are the maintenance costs associated with one unit of production?
The maintenance unit cost is a snapshot of the total maintenance cost required to manufacture a standard unit of production during a set period of time.
How would I implement a total productive maintenance program?
When implementing total productive maintenance (TPM), I think it’s best to gradually phase it in. It will enable an organization-wide adjustment over time.
What is the best way to use failure codes for root cause analysis?
Use failure codes systematically: start with analyzing the reasons for failures, code this information in a consistent way, and make it accessible.
What are the five pillars of maintenance and reliability?
The SMRP identified five pillars of maintenance and reliability to help facility managers create a framework for their businesses.
How much should I be spending on maintenance for industrial equipment and assets?
One such goal is to strive for spending 3 percent or less of your replacement asset value (RAV) annually on maintenance costs. Here are the details.
Should I use barcodes or RFID tags to track my equipment and assets?
Both bar codes and RFID tags can help you track your assets and equipment; and each has its own unique advantages and disadvantages.
Useful life of an Asset: Definition & Examples
IRS Publication 946, Appendix B, lists useful life estimates by industry and application. These estimates can be used as a baseline.
What do I do with old industrial equipment?
Either you replace old equipment, or you keep it around. The route you choose depends on your facility’s current demands.
What is the difference between PLC and SCADA?
The primary difference between a PLC (or Programmable Logic Controller) and SCADA is the fact that a PLC is hardware and SCADA is generally software
What are the dangers of using the mean time between failure (MTBF) metric?
When MTBF is presented you cannot instantly ascertain whether the metric is being influenced more by the uptime duration or by the number of breakdowns.
Is maintenance cost to asset value ratio a good maintenance metric?
The short answer to the question is generally “no”. However, asking the question sets into motion the bigger issue of how to evaluate any metric in facilities management.
What does a good electric motor testing program look like?
Implementing a good electric motor testing (EMT) program can be a massive positive investment in the reliability of a facility's equipment.
Am I spending too much (or too little) on maintenance activities?
A common metric is taking the total maintenance cost (MC) as a percentage of the estimated plant replacement value (PRV).
When do I need to hire a reliability engineer? How does reliability affect safety?
If you want to take proactive steps towards maintenance and you have enough data to analyze, you can benefit from hiring a reliability engineer.
How do you implement an asset life cycle management program?
Implementing a stellar asset life cycle management program requires alignment with your business strategy, data-driven decisions, and the right culture.
What are the 8 kinds of waste in Lean Six Sigma?
All continuous improvement programs and computerized maintenance systems strive for the common goal of reducing this waste as much as possible.
How can you achieve world class manufacturing reliability?
World-class manufacturing facilities successfully stay ahead of breakdowns, achieve higher asset utilization, reduce maintenance costs, and increase safety.
How can you make rotating equipment operate better, for longer?
To answer that, we should first understand exactly what causes rotating equipment to fail. The majority of failures come down to unbalance and misalignment.
What mistakes do maintenance teams make when lubricating bearings?
Overall, the main mistakes I’ve seen with lubricating bearings have to do with either too much lubrication or too little.
What makes a reliability engineer great?
Finding causes of problems can be tricky, and convincing maintenance technicians to accept new practices can be even trickier. Here are some ideas to help:
What are common mistakes reliability engineers make?
Reliability engineering is a complex process with lots of room for potential errors, lost time, and wasted money. Stay forward thinking and proactive.
What are common misconceptions about plant maintenance?
More people on maintenance staff doesn't necessarily reduce problems. In fact, it creates another kind of problem in terms of ineffective resource use
What are the benefits of infrared imaging?
Infrared analysis is actually super useful for checking temperatures, especially when you're comparing the temperature of an asset to another asset.
What mistakes are common with reliability-centered maintenance?
While RCM seems simple on its face, there are a huge number of moving parts within any solid reliability-centered maintenance plan that could go wrong.
When should I perform preventive maintenance on equipment?
Begin by checking the OEM manual. This will typically provide you with preventive maintenance guidelines. dffdadfdsfasdfasdfasdf
How do you track asset depreciation?
In order to track asset depreciation, you'll use its annual depreciation. The formula is (Initial Cost - Salvage Value) ÷ Useful Life = Annual Depreciation.
How do you determine which machines should receive preventive maintenance?
Selecting machines for preventive maintenance is a matter of finding which ones would benefit most from PM while keeping maintenance costs down.
Where should you store equipment manuals and warranties?
A CMMS is a great way to organize user manuals and warranties by asset. Upload them and they’re ready to view by anyone with access.