An Overview of FDA Regulations for Maintenance

Overview

The Food and Drug Administration (FDA) is responsible for protecting public health by assuring foods, cosmetics, dietary supplements, and drugs are safe, wholesome, sanitary, and properly labeled. They are also charged with ensuring biological devices and medical devices intended for human use are safe and effective. Other responsibilities of FDA include protecting the public from product radiation, regulating tobacco products, and advancing the public health by helping to speed product innovations. These categories of products can be referred to as FDA-regulated products.

FDA inspects manufacturers or processors of these FDA-regulated products to verify they are compliant with relevant regulations or guidelines. In addition to manufacturing sites, the FDA also inspects facilities that conduct clinical trials, labs that conduct biological studies when the studies are intended for use in applying for FDA approval of a medical product, and imported products at the border. Inspections can be conducted for the purpose of pre-qualification, routine inspection, or “for-cause” to investigate a specific problem reported to the FDA.

The role of maintenance in FDA-regulated facilities

FDA ensures quality of FDA-regulated products by carefully monitoring manufacturing or processing site compliance with its Current Good Manufacturing Practices (CGMP) regulations. Specific CGMPs exist for each product category and they can be found under Code of Federal Regulations Title 21. Some examples of these are listed below:

  • CFR 21 Part 110: CGMP in Manufacturing, Packing, or Holding Human Food
  • CFR 21 Part 111: CGMP in Manufacturing, Packaging, Labeling, or Holding Operations for Dietary Supplements
  • CFR 21 Part 211: CGMP for Finished Pharmaceuticals

Each of these Parts is further broken down into Subparts under which specific requirements are listed. The main roles of the maintenance department can be found in Subparts that focus on buildings and facilities, and equipment. The following Subparts are those found under the the Parts listed above:

  • CFR 21 Part 110 Subpart B and C: Buildings and Facilities and Equipment
  • CFR 21 Part 111 Subpart C and D: Physical Plant and Grounds and Equipment and Utensils
  • CFR 21 Part 211 Subpart C and D: Buildings and Facilities and Equipment

CGMP serve as guidelines to enable a site to produce clean, safe, properly labeled, and effective products. The actual requirements listed under each of the subparts focuses on facility design, equipment, and procedures that promote cleanliness and organization similar to lean principles. Here are some CGMP guidelines and specific ways that maintenance contributes to compliance:

CGMP Guideline Maintenance Actions
The grounds about a food plant shall be kept in a condition that will protect against contamination of food. Removal of litter and waste, proper maintenance of roads and parking lots, adequately draining and drying areas that may contribute to foodborne filth or provide a breeding ground for pests
Plant buildings and structures shall be suitable in size, construction, and design to facilitate maintenance and sanitary operations for food-manufacturing purposes Provide sufficient space for placement of equipment and storage of materials, create proper partitions within the plant, maintain correct air flow and enclosed systems where applicable
All plant equipment and utensils shall be so designed and of such material as to be adequately cleanable, and shall be properly maintained. Coordinate with MRO buyer to purchase the correct equipment, establish clear cleaning procedures, keep any food contact surfaces in proper repair to minimize accumulation of particles, dirt, or organic materials to minimize growth of microorganisms
You must keep proper records of written procedures for cleaning the physical plant and for pest control Create a formal facility maintenance program with clear responsibilities, frequency of cleaning and procedures, and partner up with a pest control service that satisfies the CGMP requirements
Automatic, mechanical, and electronic equipment are allowed for use. If such equipment is so used, it shall be routinely calibrated, inspected, or checked. Establish a written program designed to assure proper and consistent performance; documentation of those checks, inspections, and/or routine maintenance must be kept (with a CMMS).

 Note: The FDA, through CGMP regulations, tells you what is required but does not tell you how to meet those requirements. It is up to the organization to decide on procedures and policies that are applicable to their facility. When preparing your facility for an audit, the most simple requirements to keep in mind are to show what maintenance you perform (through documentation).

What to expect during FDA inspections

FDA inspections are typically conducted by reviewing systems which correspond to the Subparts that are applicable to the type of product/facility being audited. In the case of maintenance, Subparts for Buildings and Facilities and Equipment are of the main concern.

An FDA inspection is defined as an audit covering two or more systems, with audit of the Quality System being a hard requirement. Different numbers of systems may be covered depending on the nature of the inspection.

During an inspection, FDA auditors document findings with the intent of verifying that a manufacturing site is operating in a sufficient state of control by reference to CGMP regulations. Any non-compliances are documented accordingly to support necessary corrective action. An example of an observation that maintenance should address is “contaminated equipment” or “poorly maintained facilities.” Documentation with photos is also a common practice.

At the end of each inspection, a formal close out is conducted to review findings and recommendations. Auditors may or may not provide their initial recommendations during a close out meeting. However, organizations can expect a copy of the formal inspection report to be delivered within a few weeks after the inspection. Any negative findings may result in different actions ranging from a simple corrective action report to a warning letter or prosecution.

Want to keep reading?

Maintenance Regulations for Maintenance Teams

Learn about regulations enforced by the FDA, OSHA, and the IRS to keep your maintenance team safe and your operations up to code.
View Article

An Overview of OSHA Regulations for Maintenance

Learn about OSHA regulations that are relevant to maintenance teams inside manufacturing plants and other types of facilities.
View Article

An Overview of IRS Regulations for Maintenance

In this article, we cite some specific deductible costs and capital improvement costs that are related to maintenance operations.
View Article

4,000+ COMPANIES RELY ON ASSET OPERATIONS MANAGEMENT

Leading the Way to a Better Future for Maintenance and Reliability

Your asset and equipment data doesn't belong in a silo. UpKeep makes it simple to see where everything stands, all in one place. That means less guesswork and more time to focus on what matters.

Capterra Shortlist 2021
IDC CMMS Leader 2021
[Review Badge] GetApp CMMS 2022 (Dark)
[Review Badge] Gartner Peer Insights (Dark)
G2 Leader