Answered September 06 2019
Common preventive maintenance for fans includes cleaning blades, lubricating parts, checking vibration, and inspecting bearings. Although daily maintenance is minimal, monthly and yearly tasks should not be ignored. Fans are simple, yet critical, components of an HVAC system.
Fans essentially change the airflow and pressure in a given area, which results in a decrease in temperature. Two types of fans are common: centrifugal and axial-flow. Aeration applications, often known as squirrel-cage fans, use centrifugal fans. Axial-flow fans are either propeller-based or tube-axial based. The first (propeller-based) keeps dirt and debris from accumulating. The second (tube-axial based) operates at a higher pressure and flow rate and is more efficient.
Fans are often stand-alone means of cooling particular areas or act as an adjunct to an air conditioning system. They are also a critical component of an overall HVAC system. Because of their relatively simple design, fans can provide years of service with very little maintenance. As a result, it’s very easy to overlook this important part of the system and assume it doesn’t need any maintenance at all.
The problem is that if and when a fan breaks down, the entire HVAC system will stop working. As a result, preventive maintenance must be performed to keep fans operating reliably. Maintenance tasks for fans include tightening belts, inspecting bearings, cleaning blades, and lubricating moving parts.
If maintenance technicians must turn off or sequence fans each day, they should perform an overall visual inspection of the system to see if anything looks amiss.
Beyond a quick daily inspection, fans typically require only monthly and annual maintenance work. On a monthly basis, check and clean pulleys, blades, and filters. Technicians should also check alignment and tension of belts, perform regular lubrication, and inspect dampers and air quality.
Once a year, inspect, clean, and repair wiring, ductwork, coils, and insulation as needed.
Latest Maintenance Articles
How to Create a PLC Maintenance Checklist
Everything You Always Wanted to Know About CMRP Certification
What Are the Risks and Benefits of Using a PLC?
Comprehensive Guide to Building a Maintenance Excellence Team (Part 1: Crawl)
What You Need to Know About ISO 41001 Certification and Compliance
Why Your Maintenance Team Should Be Trained as CMMS Superusers
Oil & Gas
Although both preventive maintenance and reliability-centered maintenance have the same end goals, they approach assigning maintenance tasks differently.
Preventing the main problems with a conveyor starts with knowing what you’re dealing with. Here are a few high-level steps you could do to avoid setbacks.
Single-minute exchange of die (SMED) is a strategic process that allows teams to reduce the amount of time required to complete equipment changeovers.
There are many ways to figure out how your maintenance team is performing. We've made it simple in this short quiz to find out the best metric for you!
FRACAS is a three-step process that stands for Failure Reporting, Analysis, and Corrective Action System. We explain the entire FRACAS process here.
Reliability engineers are responsible for identifying and managing asset reliability risks and then working to reduce those risks.
Creating a sustainable reliability program requires the right people, processes, and technology from companies that commit to change in corporate culture.
A few quick wins for your reliability program include improving lubrication, optimizing preventive maintenance, and tightening STO.
Insufficient infrastructure maintenance practices contributed to the overall devastation in the 2019 California wildfires.
Reliability centered maintenance (RCM) is a maintenance strategy that involves using the most optimal methods to keep equipment running.
Lean maintenance is a proactive maintenance philosophy/ and strategy that aims to support reliability in the most efficient way possible.
A floating schedule helps add a great deal of flexibility to your equipment management program, allowing requests to be scheduled at a treshold.
FMEA stands for Process Failure Modes and Effects Analysis. It is an analytical process used by businesses to locate and identify possible process failures.
Design failure mode and effects analysis (DFMEA) is a process tool that helps companies locate and repair design failures.
A planned maintenance system, or PMS, helps maintenance teams track recurring maintenance tasks. They make sure each task occurs based on set intervals.
Manufacturers might see up to 800 hours of downtime per year. In 2016, the average cost of downtime per hour across all businesses came out to $260,000.
Risk-based maintenance addresses risk-sensitive systems and machinery. RBM determines the most economical way to distribute resources to repair a system.
Common preventive maintenance for building controls work to provide the maximum amount of comfort with minimal energy usage.
Usage-based maintenance is a type of meter-based preventative maintenance. The trigger is when usage on a system or machine passes a threshold.
Common preventive maintenance for air compressors revolve around detecting and fixing leaks and maintaining proper pressure to minimize energy usage.
Common preventive maintenance for pumps includes regular inspection for stability, scheduled lubrication, and thorough evaluation of potential problems.
Common preventive maintenance for fire alarms and smoke detectors is minimal and revolves around regular testing to ensure proper function.
Common preventive maintenance for cooling towers ensure circulating water is clean and mechanical function of fans and motors are maintained.
Common preventive maintenance for chillers typically involves cleaning, monitoring temperature and pressure, and general system testing.
Boilers are heavy-duty equipment that generate hot water or steam by burning fuel. Boilers generally operate under high temperatures and pressures.
Forest fires can be reduced by protecting areas around young forests and good sanitation practices in mature forests. Read more here.
Preventive maintenance checklists for steam traps include items about temperature, pressure, condensation and equipment functioning.
Equipment failures are a major setback for plant operations. During breakdowns, restoring plant operations lies in the hands of the maintenance team.
The connectivity that allows IIoT to deliver amazing amounts of data also gives potential access of data and control of critical devices to hackers.
Criticality analysis is a measurement used to prioritize assets in maintenance planning, combining the seriousness and frequency of a potential failure.
Since Operations often focuses on production uptime while maintenance focuses on improving reliability and minimizing costs, the two are often at odds.
Staying on top of maintenance issues for CNC machines requires careful scheduling, observant technicians, available parts, and comprehensive documentation.
Maintainability refers to the ease with which maintenance activity can be performed on an asset or equipment. Learn more about maintainability.
The key to improving schedule compliance for your preventive maintenance is to analyze your data. This starts with tracking your PM work orders.
To track your schedule compliance, simply find out how many PMs you complete before their due date and compare those to the total scheduled.
The way I’d advise documenting preventive maintenance is with a CMMS or other form of work order management software, but the exact way may depend.
When heavy equipment starts wearing out, it can get dangerous. To understand the impact PM has on workplace safety, it might help to look at a few examples.
The first type of PM people often overlook is checking fluids in equipment. Hydraulic fluid in machinery, for instance, needs to be routinely monitored.
If you want a successful preventive maintenance program, you have to start with the technicians. If they don’t buy into it, failure is imminent
John Day, Jr. proposed the 6:1 rule. This rule asserts that for every 6 PM tasks you perform, you should be finding one corrective maintenance task.
Costs link directly to how reliable your equipment is, making it rather difficult to find ways to cut costs while maintaining the health of your assets
The signs seem to show that deferred maintenance will probably decrease in the future due to organizations recognizing the need for proper maintenance.
You might have heard of the 6:1 rule. The gist of this rule is that for every six preventive maintenance tasks you do, you should find one corrective task.
There's a ton of different mistakes you can make when setting up and running a preventive maintenance schedule including planning scheduling and rollout.
In property maintenance, issues that build and build can end up being massively expensive, difficult to fix, and potentially dangerous for the tenants.
You'll actually find some divisive information out there. In short, it is entirely possible to do too much preventive maintenance.
In general, preventive equipment maintenance is a good idea for buildings and facilities - catching issues quickly helps avoid any unnecessary damage.
A good preventive maintenance program is critical because a working HVAC system impacts the business’ ability to keep its service lines up and running.
Supervisors are often largely focused on the day-to-day aspects of maintenance work, not the long-term goals of maintenance planning.
The primary benefits of preventive maintenance come down to reliability. As you keep each asset in good repair, it’s less likely to break down.
Ideally, you should try implementing a preventive maintenance program as soon as possible. You’ll want to start small though.
A PM program not only keeps your boiler up and running reliably but also lengthens the life of your equipment and improves safety for employees.
The preventive maintenance scheduling process includes creating the PM, scheduling the PM, and assigning, completing, and logging the work.
It's a little like your car - you want to maintain your vehicle before the issues occur so you're not stranded on the side of the road.
Well, like a lot of the English language, there's not a technically "correct" word to say because both of the words mean the same thing.